Hi All.
In 5G, when using GBR QCI profile and sending data over it, I see that on PDCP layer data is getting dropped because RLC is sending wrong ACK (sends ACK on different packet number).
This happens only on GBR QCIs.
When using non GBR QCIs then all is fine and data is getting pumped properly.
Any idea?
| Topic | Replies | Views | Activity | |
|---|---|---|---|---|
| 5G L2 nack are visible at some slots but at L1 IQ data all slot were decoded properly | 2 | 251 | May 26, 2023 | |
| Packets from UE transmitting towards gNB getting lost | 3 | 413 | June 24, 2022 | |
| DRB addition failure | 1 | 773 | October 31, 2021 | |
| NR SCG fail with cause rlc-maxnumretx due to RF connection issue | 2 | 479 | September 24, 2021 | |
| What happens if network doesn’t get that ACK/NACK from UE? | 3 | 408 | August 4, 2023 | |
| What would be the failure message if there is wrong LAC-TAC mapping? | 4 | 765 | October 19, 2022 | |
| Sudden Increase in ENDC Drop Count | 3 | 1595 | October 10, 2020 | |
| Problems with split bearer 5G NSA | 3 | 829 | September 13, 2022 | |
| CRC decoding is failing on New Transmission of 256 QAM with MCS 27 | 0 | 357 | September 20, 2021 | |
| SgNB addition reguest rejections with cause: no radio resource available | 5 | 1206 | September 12, 2024 |